Zum Inhalt springen

Tiptronic gearbox problem


bv16bld

Empfohlene Beiträge

Hello all !

 

I bought an audi a2 3l last year and after 8 months it starts do do problems in 2nd and 3rd gear,but i notice that if i ll accelerste over 3000 rpm from 5 attemps 3 times will change in auto and if i change myself need to accelerate over 3000 and then before change the gear i need to release the accelerate pedal to shift succesfull.....if not the engine enter in some protection mode and it will not let me to accelerate anymore even in neutral ! So i payed a guy with wagcom and he said that it has no error but after reading on internet about 3l gearbox i have found that i have some lose joints on the actuator sistem and change them,after this the car was working ok in 3rd but was still making problems on 4th till one day ,when i stoped at atraffic light when was green my audi gearbox died ?.so after this i call again the guy with vag com and found that dont have connection with one of the gearbox lever switches.i have attached some photos related with what i m talking about !

 

also i have removed the battery and when i have put it back i ve notice that my radio is not working,it has only light and thats it...

 

Thanks and sorry for english language,i dont know german  :(

 

p.s. if anybody knows how to remove the center console arround the gearstick please help me ! ?

20181030_124548.jpg

20181030_124513.jpg

20181029_151950.jpg

20181030_122524.jpg

20181229_094947.jpg

20181229_095544.jpg

Link zu diesem Kommentar
Auf anderen Seiten teilen

The wear in the lever joints looks like the problem. 

Former 3L expert, Sherif Topal once mentioned excessive wear to produce failure mode since the position of the levers is too far away from the learned Position and also the basic setting will not remove this problem because even at the basic setting procedure, the position of the levers cannot be measured correctly. 

Link zu diesem Kommentar
Auf anderen Seiten teilen

I know but I have chabged and now I dont have that wear and also the new lever has the same position when I have fit it back on the car!

 

The problems after checking error with vag com are the switchies from gearbox lever and I need some info on how to remove the base of the center console to reach the micro switchies

 

Thanks !

Alex

Link zu diesem Kommentar
Auf anderen Seiten teilen

vor 1 Stunde schrieb bv16bld:

I know but I have chabged and now I dont have that wear and also the new lever has the same position when I have fit it back on the car!

 

The problems after checking error with vag com are the switchies from gearbox lever and I need some info on how to remove the base of the center console to reach the micro switchies

 

Thanks !

Alex

I must have overhead the information that you had exchanged the lever arms..

 

With a faulty F257, a basic setting will of course fail. Without the basic settings, your car will not work problem free. Even when you believe that the new levers have the same position, they don’t! Bad news: Even for money you don’t get the micro switches anymore. They are 3 switches on one set with cables. 

I just had this problem with a friends 3L

Removing the shift assembly is easy to make but a bit difficult to describe. 

At least you will have to remove: handbrake cover, small plate under the ashtray, 2 side panels in the foot area (!!) and some other, self describing parts. Important not to use force when disassembling! 

I tried to buy the micro switches through an electronic parts shop but failed to get the right ones. 

Still there are some disassemblers in this forum which might have a used part. 

Bearbeitet von Lupo_3L
Link zu diesem Kommentar
Auf anderen Seiten teilen

Errors about F207, F256, F257, F259, G272 are false positives mostly.

 

20181229_094947.jpg

 

Removing center cover

First, remove the side cover. Be aware, the Torx 25 screw is under a oval cover.

Begin with the right side, because you can find the screw easily.

On the left side, the screw is hide by throttle/gas pedal.

 

48263115_SeitlicheAbdeckung-Kopie.thumb.jpeg.64436dcbb9dac373aa028e9bc23cd0ea.jpeg

 

Pull the carpet out, and then pull out the side cover on the lower edge.

 

Then remove the cover behind the gearbox lever. It's only clip in.

1360866675_20190112_210948-Kopie.thumb.jpg.3cf855ed93a3fc61bcafdcb4d9a496ca.jpg

 

Remove the 2 Torx 30 Screws.

20190112_211001.thumb.jpg.07e41778a1e83ea1529174f47a8c80c2.jpg

 

Remove the 3 Torx 30 Screws.

1005947517_20190112_211013-Kopie.thumb.jpg.f08c6ac791291d5baf9b0535d1331b21.jpg

 

Push the side cover in driving direction.

877054795_20190112_211044-Kopie.thumb.jpg.0de9e30b19ac2f98a94cfeedc387d47d.jpg

 

Remove the 2 Torx 30 Screws.
648588516_20190112_211115-Kopie.thumb.jpg.a0f206082f2600a93bfa90b7ca80c2bf.jpg

 

Remove the cover from the handbrake handle.

20181206_182931.thumb.jpg.915a9415e372fe91a422bc130c6ec73d.jpg

 

Therefor pull as far as you can the handbrake handle up. On 6 o'clock you'll find a hole. Put in a small screwdriver, to release the lock. If you don't do so, like most people, the lock will be damaged.

952928511_20190112_213833-Kopie.thumb.jpg.f8460d0cd836dcf24109fe84689d0c77.jpg

 

Remove the handbrake cover by pulling it up. Remove then the 2 Torx 30 Screws.

1829770459_20190112_211133-Kopie.thumb.jpg.52cfec4c351bd4ed8a427415d1dfe43d.jpg

 

Now you can remove the center console.

The handbrake lever can avoid removing the center console. If you can't pull up further, so release the handbrake, remove the 2 Nuts, and pull the handbrake lever from the screws. Now you should remove the center console.

 
After you have worked on the gearbox, clutch, Gangsteller, KNZ you have to do a basic setting, especially when you worked on the rod.

 

20181029_151950.jpg

 

To do the basic setting, batterie voltage have to >= 12,4V.

It's a good advice, to switch off the airco, seat, window, mirror heating, radio, lights, ... and to connect a charger to the battery.

Link zu diesem Kommentar
Auf anderen Seiten teilen

Deine Meinung

Schreibe jetzt und erstelle anschließend ein Benutzerkonto. Wenn Du ein Benutzerkonto hast, melde Dich bitte an, um unter Deinem Benutzernamen zu schreiben.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Nur 75 Emojis sind erlaubt.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Editor leeren

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

  • Aktivitäten

    1. 12

      Vom Flop zum Superstar, der Audi A2

    2. 165

      8. Audi A2 Schraubertreffen am 06.04.2024 in 59510 Lippetal / You are welcome 🚘

    3. 165

      8. Audi A2 Schraubertreffen am 06.04.2024 in 59510 Lippetal / You are welcome 🚘

    4. 165

      8. Audi A2 Schraubertreffen am 06.04.2024 in 59510 Lippetal / You are welcome 🚘

    5. 35

      Welchen A2 sollte ich zum gelegentlichen Gebrauch und für eine lange Haltezeit kaufen? (Motor, Ausstattung, ...)

    6. 99

      E10 – Verträglichkeit

    7. 99

      E10 – Verträglichkeit

    8. 35

      Welchen A2 sollte ich zum gelegentlichen Gebrauch und für eine lange Haltezeit kaufen? (Motor, Ausstattung, ...)

    9. 99

      E10 – Verträglichkeit

×
×
  • Neu erstellen...

Wichtige Information

Wir verwenden Cookies. Mit weiteres surfen erklären Sie sich mit diesen einverstanden.