Electrical connector to Hydraulic Control Unit A2 1.2tdi

[JohnL]

Hello!

 

I wonder if it is possible to obtain the 8 pin plug that connects the cables to the hydraulic control unit except as part of a wiring loom for the gearbox?

 

The dealer found me a connector P/N: 8D0 973 834 but this does not look correct as it does not have the locking mechanism.

 

In my car it is held in place with a cable tie and I would like to fix it properly in case I ever need to do the basic setting again. Because it is held on with a cable tie it is not so easy for me to remove to examine.

 

Here is a picture of the part:

[JohnL]

Hello!

 

I wonder if it is possible to obtain the 8 pin plug that connects the cables to the hydraulic control unit except as part of a wiring loom for the gearbox?

 

The dealer found me a connector P/N: 8D0 973 834 but this does not look correct as it does not have the locking mechanism.

 

In my car it is held in place with a cable tie and I would like to fix it properly in case I ever need to do the basic setting again. Because it is held on with a cable tie it is not so easy for me to remove to examine.

 

Here is a picture of the part: [ATTACH]49556[/ATTACH]

 

Some better images:

 

As you can see the number starts 8D0 973 then possibly a 7?

[DerWeißeA2]

8D0 973 834 is the connector belonging to the hydraulik unit.

 

You need 8D0 973 734, the female part "coming from the car".

 

Mark

[JohnL]

Thank you so much for this Mark!

I could see the part was wrong but could not find the correct part number in the catalogue when I was at the dealer.

 

John