Zum Inhalt springen

Empfohlene Beiträge

Geschrieben

I've recently fitted Monroe Reflex dampers to my 1.4 petrol SE and the ride height has ended up at fr 36mm rr 34mm (I forgot to measure the height before I started). I measured the ride height the ride height of a standard sport to compare and that was 35mm fr & rr. I figure the front dampers have had the same effect as FSDs and raised the front so fitted Weitec front springs at the weekend but after 200km it's only come down 5mm to 35.5. Shitting elk still :(

Does anyone have any measurements of any suspension setups to compare? I'd like to get it sitting level again!

 

Mfg :)

Geschrieben

Hmm, lots of good info there:cool:

 

Am I correct in thinking that if a gas shock effectively increases the spring rate I need to run a lower spring rate to get it to sit & ride the same as standard?

Geschrieben

yes. It may be that there are differences of about 10mm in changing to gas shocks. during my conversion, I have therefore taken KAW 55/30 to make up for it. now he is pretty straight, I like it.

Deine Meinung

Schreibe jetzt und erstelle anschließend ein Benutzerkonto. Wenn Du ein Benutzerkonto hast, melde Dich bitte an, um unter Deinem Benutzernamen zu schreiben.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Nur 75 Emojis sind erlaubt.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Editor leeren

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

  • Aktivitäten

    1. 10

      Wechsel von 17” nach 16”

    2. 1

      Fahrwerk, Sturz auf beiden Achsen links raus...

    3. 6

      Hat schon mal jemand versucht, die Stützlast der AHK zu erhöhen?

    4. 1

      Fahrwerk, Sturz auf beiden Achsen links raus...

    5. 4

      [1.4 BBY] Unrunder Motorlauf

    6. 0

      Audi A2 1.4 TDI Bj 2001 - Nach Wechsel des Bremskraftverstärkers und Entlüften: Bremse sehr hart

    7. 4

      [1.4 BBY] Unrunder Motorlauf

    8. 42

      14. Audi A2 Schraubertreffen am 09.08.2025 in 59510 Lippetal / Cool down . . .

    9. 6

      Scheibenwischerposition / Wischer schräg

    10. 6

      Scheibenwischerposition / Wischer schräg

×
×
  • Neu erstellen...

Wichtige Information

Wir verwenden Cookies. Mit weiteres surfen erklären Sie sich mit diesen einverstanden.