myhr Geschrieben 21. November 2017 Geschrieben 21. November 2017 This morning when I left home the car didn’t change gear to 3th or 4th gear .5 gear I don’t know ! Reverse gear OK . First and second gear OK. Checked SSP 221 so a reason could be that engagement of valve 2 for the gate selector didn’t work. (see SSP221). Reason for that could be cable harness problem, connector problem,,,, Today it was also the first day with minus temperature. Any one that have had this problem or have a good idea where to searche for the problem. Answer in german if easier. MFG Myhr Zitieren
DerWeißeA2 Geschrieben 21. November 2017 Geschrieben 21. November 2017 Check the coupling rod on the gear actuator, the ball heads wear out with the years and the rod jumps off the ball head. Zitieren
myhr Geschrieben 22. November 2017 Autor Geschrieben 22. November 2017 vor 21 Stunden schrieb DerWeißeA2: Would the rear gear work if that was the case ? Will check, problem no lift here i Gothenburg that I can use. I will use a jack and Anyway DerWeiSeA2 you are a true expert .Thank you for your advise. vor 21 Stunden schrieb DerWeißeA2: Zitieren
myhr Geschrieben 24. November 2017 Autor Geschrieben 24. November 2017 Today no problem with the car. All gears OK. The only reason that I no can think of is that when the problem occured it was the first night with minus degrees. I think I have seen that some other A2 member had a problem with the gearbox when it was minus degrees. Water in the "gangsteller" ? Any one have that have had this problem ? MFG Kurt Myhr Zitieren
Empfohlene Beiträge
Deine Meinung
Schreibe jetzt und erstelle anschließend ein Benutzerkonto. Wenn Du ein Benutzerkonto hast, melde Dich bitte an, um unter Deinem Benutzernamen zu schreiben.