[1.2 TDI ANY] hydraulic oil pump constantly running

[Germantas]

[Mankmil]

vor 3 Stunden schrieb Germantas:

Is that normal, or is it a problem?

Yes, it iwill become a proplem.

 

 

vor 3 Stunden schrieb Germantas:

vailable, so I’d have to search and buy everything one by one.

Sizes are somewhere listed in the Wiki here.

 

vor 3 Stunden schrieb Germantas:

I read somewhere that they are the same, only the high-pressure pipes are a different length. Is that true?

Both is correct.

[Germantas]

I get offer for 115eur this one. Now question, repair old one or buy this one. I bought from him pump unite and it works well.

https://ebay.us/m/iDL5Hl

Bearbeitet 20. September 2025 von Germantas

[Germantas]

I can't find gears selector O rings measurements or parts numbers. Can someone have this information or show where i can find it. Thank you

[_Manni_]

Have you looked in the wiki ?? Imho are their the dimensions

[Germantas]

I found lot of information about pump unite O rings,but not gears selector.

P.S. Finally found it in Wiki. Thanks

Bearbeitet 20. September 2025 von Germantas

[TitusM]

I have a guy that updates the hole system including hall sensor for clutch actuator. Modifies the xValve for better control and repairs everything else on the system. Also you can get an adaptor for the pressure reservoir to fit the bigger febi version. 

If you are still interested live a message in PV.

You do have to take everything off and ship it and wait for it to return and of course to have a little faith:)).

What you have to remember with the new parts is that the basic settings is not done with clutch at 1.8+ but between 1 and a.14. 

I did send the pump and the clutch actuator. For me it is a big difference. 

 

I intent to visit him and have the gearbox done and the gearbox actuator. 

cheers and good luck